Biogas materials generally include crop stalks, forages, leaves, and feces. If lignin, cellulose, hemicellulose, pectin, and waxy compounds in the straw are not destroyed by treatment, they are likely to crust and affect gas production and production. Gas efficiency. Biogas material pretreatment mainly has the following effects: 1, shorten the gas production time. Straw is difficult to digest, in which lignin, fiber, etc. are difficult to be decomposed, so the straw is quickly pretreated with a fast aerobic fermentation, such as Gem Biogas materials, and then the fermented straw is put into the biogas tank. Save rot time, advance into the gas production phase, save more than 60% of the time than natural heaping. 2, to prevent crusted obstacles. The surface of the straw has a layer of wax that is not easily destroyed by the biogas microorganisms. If the straw directly under the pool will be a large number of floating crust, it is difficult to be decomposed and fully utilized by fermentation, thereby significantly affecting the gas production and gas production efficiency, such as before entering the pool with Glypred biogas materials after the pretreatment of fast rot Destruction (fermentation, softening, rot) prevents crusting and can increase gas production by 30 to 50%. 3, improve gas production efficiency. After the raw material is pretreated, the fermentation time in the pool is naturally reduced, and the inlet temperature can meet the requirements and start gas production. If the raw material is used together with the Gambo Biogas Fermenting Agent, the startup time can be reduced by more than half and can be increased. 50 to 100% of gas production, gas production is even and stable, and it saves a lot of manpower time and cost. Details can be consulted: Beijing Huaxia Kangyuan Technology Co., Ltd. Telephone Toll Free Hotline: Loligo Squid,Loligo Chinensis,Loligo Chinensis Squid,Frozen Loligo Squid Zhejiang Zhoushan Jiaze Aquatic Co., Ltd. , https://www.tianjia-aquatics.com