To be excellence from the start is always Zhengli's goal for over 25 years and for future. With every effort in combination of R&D, manufacturing, quality and commercial development, Zhengli has a wide variety of tailored primary packaging solutions to meet your specific needs and offer it up to your competitiveness. Tailored choice can be applied for vials, cartridges, ampoules, syringes and other glass containers including pre-fillable, siliconized, frosted, amber and silk screen laser marking.
We can produce Pharmaceutical Packaging,Sample Glass Vials,Customization Pharmaceutical Packaging, Customized Bottles, Customization vials
. siliconized
. frosted glass
. silkscreen & laser print
Customization Pharmaceutical Packaging,Sample Glass Vials,Customization Pharmaceutical Packaging,Customized Bottles Ningbo Zhengli Pharmaceutical Packaging Co., Ltd. , http://www.zlpharmapkg.com
In developed countries, developed countries began to develop industrial microwave vacuum drying equipment in the 1980s, and achieved good results in practical applications. French International Microwave Company processed the seedless raisins with microwave vacuum drying equipment, and changed the traditional process to 65 ° C, 24 hours hot air drying to 50 ° C, 5 hours microwave vacuum drying, product quality and output were greatly improved. In the late 1990s, our company took the lead in researching and developing microwave vacuum equipment in China. Through several years of efforts, we completed the development of industrialized 10KW microwave vacuum drying equipment in 2000. It provides a new and efficient drying equipment for pharmaceutical engineering, bioengineering, chemical engineering, materials engineering and deep processing of agricultural and sideline products.
Advantages of microwave vacuum drying equipment
1. Efficient and conventional vacuum drying equipment is heated by steam. It needs to be heated from the inside to the outside. The heating speed is slow and it takes a lot of coal. The microwave vacuum drying equipment uses electromagnetic wave heating. It does not need heat transfer medium and is directly heated to Inside the object, the heating rate is fast, and the microwave energy of 1 kW can heat the water at normal temperature to 100 ° C in 3-5 minutes, which avoids the above disadvantages, so the speed is fast, the efficiency is high, the drying cycle is greatly shortened, and the energy consumption is reduced. Compared with conventional drying technology, it can improve work efficiency by more than four times.
2, heating evenly due to microwave heating, the material is heated simultaneously from the inside to the outside, the temperature difference between the inside and outside of the material is very small, does not produce the situation of internal and external heating inconsistent in the conventional heating, resulting in the effect of puffing, which is conducive to crushing, so that The quality of drying is greatly improved.
3, easy to control, easy to continuous production and automation, due to the rapid adjustment of microwave power and inertia, easy to control, you can adjust the temperature between 40 °C -100 °C.
4, small size, easy installation and maintenance
5, the product quality is good, compared with the conventional method, the quality of the processed product has been greatly improved.
6, microwave has the effect of disinfection, sterilization, product safety and hygiene. The shelf life is long.
7. The economic benefits are significant.
From the above-mentioned characteristics, energy saving, consumption reduction, product quality improvement, safety and hygiene, and low equipment investment cost can be seen to show significant economic and social benefits.
Basic structure and working principle
1. Flow chart of microwave vacuum drying equipment applied in the processing of precious medicines (omitted)
Circuit control design
1, circuit composition block diagram (omitted)
system design
1, vacuum pump selection
2, material turntable design
3, the whole machine thermal balance design
4, power adjustment design
Economic Benefit Analysis
The process performance, economic benefits and product quality of a variety of drying equipment processed by a pharmaceutical factory in Jiangxi were compared. The drying indexes are as follows:
Project dynamic microwave drying spray drying steam vacuum drying drying time 45~70 minutes 3~5 seconds 20~45 hours drying temperature 45~60 degrees (arbitrary setting) Inlet air 180 degrees 50~60 degrees (difficult to control)
Extract loss 0 2~5% 3% or more water 4~5% 2~4% 4~6%
The content loss is 20~30% higher than other equipment, 20~30% drop, 20~30% decrease.
The same quantity of production requires 3 units, 5 sets of 5 pieces per kilogram of dry paste, 0.4~0.5 yuan/kg, 3~4 yuan/kg, 3~4 yuan/kg.
Drying method: process configuration
The above can be seen: the drying cost is low, the benefit is good, the equipment is small, which is equivalent to 20% of the area of ​​the steam vacuum dryer and 30% of the spray drying equipment, which greatly saves the purification plant. Dynamic vacuum microwave dryer is not only used for traditional Chinese medicine extracts, but also for food products, food chemicals, especially for pastes and viscous materials. It is also more suitable for killing bacteria.
Conclusion
The successful development of industrial microwave vacuum drying equipment has filled the domestic gap. This high-tech equipment has greatly promoted the development of national technology, especially the development of China's pharmaceutical industry, which will have far-reaching effects. At the same time, its successful development has opened up a broader field for the application of microwave energy.
The successful development of this product has made breakthroughs in many key technologies. It also proposed some theoretical basis and methods of design, and gained a lot of valuable experience in practice, which laid a solid foundation for the further development of this technology.
The actual operation shows that the equipment has excellent performance, advanced technology and reasonable design. It is a new technology and new product with remarkable economic benefits, good social benefits and high promotion value.
Application of microwave low temperature vacuum drying equipment in the pharmaceutical industry
Microwave vacuum drying equipment is a new type of microwave energy Application equipment combining microwave energy technology and vacuum technology. It has a series of advantages of microwave and vacuum drying, and overcomes the shortcomings of conventional vacuum drying cycle and low efficiency. In the drying process, the work efficiency can be improved by 4 to 10 times compared with the conventional method. With high drying yield, good quality and low processing cost, microwave vacuum drying equipment is a high-tech product integrating electronics, vacuum, mechanics, thermodynamics, program control and other disciplines. Based on the in-depth study of physical changes in matter, internal and external heat and mass exchange, and water migration under vacuum conditions, a new technology and process have been developed. In industrial large-scale production, there are many items that cannot be dried under high temperature conditions, such as some medicines, chemicals, nutritious foods, and high-grade Chinese herbal medicines such as ginseng and antler. In order to ensure product quality, the drying treatment must be below 100. °C or at room temperature, it is known that the gas pressure is lowered and the boiling point of water is also lowered. For example, at one atmosphere (101.3 kPa), the boiling point of water is 100 ° C, and at 0.073 atmosphere (7.37 kPa), the boiling point of water is 40 ° C. Under vacuum conditions, heating the object allows the internal moisture of the object to evaporate without warming up. Air convection heat transfer is difficult due to vacuum conditions, and heat is supplied to the material only by means of heat conduction. The conventional vacuum drying method has a slow heat transfer rate, low efficiency, and difficulty in temperature control. Microwave heating is a kind of radiant heating. It is a direct action of microwave and material to heat it inside and outside. It does not need to transfer heat through convection or conduction. Therefore, the heating speed is fast, the drying efficiency is high, and the temperature control is easy.