Aode Machinery (Changzhou) Co., Ltd. specializes in the production and sales of mold temperature machine (mould temperature control machine, mold thermostat, mold temperature control machine, mold temperature control machine), rapid cooling speed hot high temperature mold temperature machine, quenching hot and cold mold temperature machine , steam injection (high light) mold temperature machine, die-casting mold temperature machine, oil temperature machine, oil heater, water temperature machine, water heater, high temperature mold temperature machine, temperature control range water temperature 35-180 degrees, oil temperature 45-350 degrees , chiller, freezer, industrial chiller and other temperature control equipment. Using high-temperature steam, make a constant heating path on the mold (similar to the cooling channel of the ordinary mold). When the injection molding machine is closed, the high-temperature steam is blown. First, the mold temperature is raised to a set value, and then the mold is started. Injecting plastic into the cavity, after the injection molding machine completes the pressure-holding and cooling, it starts to inject cold water. The mold temperature drops to a set value and then the mold is opened. Then the air is blown into the mold to completely blow away the cold water to complete the high-gloss process of the entire injection molding process. Steam injection molding uses high-temperature steam to make a constant heating path on the mold (similar to the cooling channel of ordinary molds). When the injection molding machine is closed, high temperature steam is blown, firstly, the mold temperature is raised to a high value, and then Start to inject plastic into the cavity, and after the injection molding machine completes the pressure-holding and cooling, start to inject cold water. The mold temperature drops to a set value and then the mold is opened. Then, air is blown into the mold to completely blow away the cold water, completing the whole. Injection molding process. Features: Application: Currently used in LCD TVs, computer LCDs, automotive LCDs, lamps and optical instruments. In the conventional injection molding process, when the mold temperature is set low, the molding cycle can be shortened, but the sink line is likely to occur, resulting in poor appearance quality. On the contrary, when the mold temperature is set high, the appearance quality of the surface of the product can be improved, but warpage, sagging, poor size, and the like are likely to occur, and the molding cycle is prolonged, and the cost is increased. High-gloss steam injection molding technology can solve both problems at the same time. It uses the steam and cooling water generated by the steam furnace to control the temperature of the mold during a molding cycle, so that the advantages of both methods can be exerted. First, by injecting steam before injection, the temperature of the mold is brought to a temperature exceeding the thermal deformation of the resin, and then the molten resin is injected, thereby forming a molded article having no surface and good surface quality. After the injection of the molten resin is completed, the cooling process is started. Cooling water is used to rapidly lower the mold temperature below the temperature at which the resin is thermally deformed. In this way, the molding cycle can be shortened by speeding up the curing speed of the resin, and problems such as warpage and sagging can be solved. High-gloss steam injection can eliminate the surface melting, splicing, corrugation and silver thread on the surface of the product, completely solve the surface shrinkage phenomenon of the plastic product, and make the surface finish of the product reach the mirror level. The product does not require subsequent processing of the spray, which effectively reduces costs and shortens delivery time. In addition, high-gloss injection molding can also solve the phenomenon of floating fiber produced by fiber-added products, so that the product quality is more perfect. In thin-wall molding, high-gloss injection molding helps to improve injection molding fluidity and improve product quality and strength. It also reduces the injection molding cycle for thick-wall molding by more than 70%. Aude's high-speed cold-speed hot-mould temperature machine has 8-inch LCD true color Siemens LCD display, touch-type Chinese digital input, full Chinese interface, easy to operate. The full-closed loop system controls the input and output temperature detection, and feeds the PLC to the actual temperature of the mold, and the digital color map changes to ensure that the output is accurate and stable. The steam, cold water, and mold temperature are displayed, interlocking with the injection molding machine signal with time and action. The high-developing mold temperature machine newly developed by Oude Zui has three models suitable for injection molding machines of 600-800 tons and 300-500 tons and 300 tons or less. The main feature of Zui is that it does not use boiler equipment, and the whole machine is equipped with high temperature hot water. Machine and freezer, and added hot water and cooling water recovery system, compared with the imported machine currently introduced in the market, calculated by 600 tons of injection molding machine, can save 1160 degrees of electricity per day (calculated by 20 hours / day), can save 12 tons of water (calculated according to 20 hours / day), compared with the use of boiler steam heating, the annual savings of more than 170,000 yuan, energy-saving effect is significant, the profits are considerable. This is the advantage of the Oude high-light mold temperature machine. In addition to flat panel TV panels, this technology can also be widely used in computer LCD, air conditioners, automotive interiors and other home appliances, automotive, communications, medical and other industries.
Description
Butafosfan is an organic phosphorus compound used as an injectable source of phosphorus in animals that takes part in energy metabolism, replenishes serum phosphorus levels, supports hepatic function and stimulates fatigued smooth and cardiac muscle. Its physiological rather than its pharmacological action accounts for its very low level of toxicity. Cyanocobalamin (Vitamin B12) assist in various metabolic processes, most notably the formation of red blood cells, and stimulates protein, carbohydrate and fat metabolism.
Butafosfan+B12 Injection indicated for debilitation by acute or chronic metabolism disorders that result from poor nutrition, inadequate management or disease (e.g. developmental and nutritional disorders in young animals due to rearing disease, and (secondary) ketosis in cows). It can be used for metaphylaxis of infertility, puerperal diseases and in support of sterility treatment. It acts as a roborant in cases of stress, overexertion, exhaustion and reduced resistance, and as a tonic in cases of weakness, secondary anaemia and chilling. Butasal-100 additionally supports muscular physiology, the treatment of infertility, and tetany and paresis as an adjunct to calcium and magnesium therapy.
Butafosfan+B12 Injection Vitamin B Injection,Vitamin Injection,Butafosfan B12 Injection Hebei Kexing Pharmaceutical Co., Ltd. , https://www.kexingpharma.com
High-light mold temperature machine, fast cooling speed hot mold temperature machine, fast cooling speed hot (high light) mold temperature machine, quenching hot and cold mold temperature machine, high-light steam injection molding, high-gloss steam injection molding process advantages:
1 Eliminate the surface of the product, dissolve the wiring, weld marks, silver wire.
2 Thoroughly solve the surface shrinkage phenomenon of plastic products.
3 improve the surface finish of the product, the surface finish can reach the mirror surface.
4 The product does not need subsequent processing of painting, which improves the phenomenon of 20-30%.
5 The thin-wall molding can improve the injection fluidity and improve the strength of the product quality, so that the thick-wall molding injection cycle can be reduced by more than 60%.
1 7-inch LCD true color LCD display (optional), touch-type Chinese digital wheel, full Chinese interface, easy to operate.
2 Full-closed-loop system controls the detection of input and output temperature, feedbacks the actual temperature of the mold to the PLC, and displays the digital color map to ensure accurate and stable output.
3 high temperature steam, cold water, air temperature and pressure six alarms, with time and action interlock with the injection molding machine letter.
4 single variable path mold temperature detection (optional), input and output pipelines use non-embroidered steel pipes, multiple sets of input and output interfaces,