Yunnan NBC Agricultural Development Co., Ltd deals in (heat pump air drying) Yunnan Plateau agricultural products. Including Flowers And Leaves, Fruits, rhizomes, poultry meat, aquatic products and other drying products. All products are free of additives, agricultural residues and phosphorus and sulfur. It has obtained the national SC food safety production certification, and at the same time, it is produced according to the international standards, reaching the export level, and can be OEM. Vegetables,Dried Vegetables,Free of Additives,Agricultural Residues Vegetables Yunnan New Biology Culture Co,.Ltd , https://www.lvsancoffee.com
1. Place the bottle filled with liquid and put on the lid onto the lower tray, rest on the V-shaped branch, hold the bottle with one hand, and pull the handle backwards with the other hand. At this time, the tray holds the bottle up. Start until the cap is pressed against the cap.
2. After the cap and the capping head are pressed, the caps of the three capping caps that are continuously rotated are rotated several times, and the cap is rolled tightly. (Note) The motor must run clockwise.
3. Push the handle forward so that the lid of the rolled cover returns to the original position with the tray, the whole operation process is completed, and the above operation can be repeated every time a bottle cap is rolled.
First, the adjustment of the upper arm This machine can be used to roll the bottle cover of 5-500ml. When rolling the bottle of different specifications, just put the bottle of this specification on the tray, hold the cross arm with one hand, and loosen the left side of the cross arm with the other hand. Use a nut to lower or raise the cross arm until the cap and cap are about 20 mm. Tighten the nut and tighten the bracket against the cross arm with a random Allen key. (Note) Pay attention to the position of the cap and the cap when tightening.
Second, the V-shaped branch adjustment The bottle is placed in the lower V-shaped branch, the two screws on the support block are loosened, and the bottle and the lower V-shaped block are moved together until the position of the capping head and the cap are aligned. , tighten the two screws on the V-block.
Third, the specific operation method 1, put the bottle filled with liquid and put the lid on the lower tray, leaning on the V-shaped branch, holding the bottle with one hand, the other hand will pull the handle backwards, then the tray Lift the bottle up until the cap is pressed against the cap.
2. After the cap and the capping head are pressed, the caps of the three capping caps that are continuously rotated are rotated several times, and the cap is rolled tightly. (Note) The motor must run clockwise.
3. Push the handle forward so that the lid of the rolled cover returns to the original position with the tray, the whole operation process is completed, and the above operation can be repeated every time a bottle cap is rolled.
Adjustment of the oral liquid bottle capping machine The machine is equipped with a plurality of capping heads, and the upper capping head can be selected according to the size of the different bottle caps. Try it out before using it in the bottle.
1. If the cover is not tightly rolled, the capping nut can be unscrewed and the upper capping head can be unscrewed in the counterclockwise direction, and then the upper fixing nut is locked.
2, the lid is rolled too tight, there is a phenomenon of rotating the cap. The upper capping lock nut can be unscrewed and screwed clockwise into the upper capping head, and then the upper retaining nut is locked.
3, the bottom of the bottle cap is not tight, the eccentricity of the three rolling heads can be adjusted according to the actual situation. If the collection is too tight, there is a phenomenon of crushing the bottle, and the eccentricity of the three rolling heads can be appropriately adjusted. 4, there is automatic start and stop function.
5, using the seven-station three-knife rolling cover principle, rolling aluminum cover without damage, the rolling mouth is firm, smooth and flat, the pass rate ≥ 99.5%
The company's main: filling and capping machine; JGF type wine filling and sealing machine; RYGF12A oral liquid filling and capping machine
Oral liquid bottle capping machine specific operation method
The specific operation method of the oral liquid bottle capping machine is as follows: