Seed & grain cleaning/ processing plant is a whole set
production line made up of different machines. Usually, the seed grain cleaning
processing plant includes equipment from seed pre-cleaning, fine cleaning,
until seed coating, packing.
Grain seed harvested from ground contains much impurity as dust,
straw, husk, stems, lumps, stones. To increase grain seeds market value, the
farmers/distributors need clean grain seeds before sell. Our grain cleaning
plant offers solution to effectively remove above impurity. Farm equipment as
seed huller, pre-cleaner, seed cleaner & grader, destoner will do the job.
The huller/de-awner removes seeds' surface husk / awn. After then, seed cleaner
& grader will remove the dust, husk, smashed stems by air suction cleaning.
Meanwhile, it will remove the oversize and undersize impurity by sieve grading.
After air screen cleaning, the destoner will separate the stones, lumps, glass
and other heavy impurity. To remove the stones and clods, we also have magnetic
separator, it is used to remove the magnetic clods and other magnetic impurity.
After grain being cleaned by above procedures, customers normally add gravity
separator to remove bad, immature, eaten, sicken seeds. Gravity Separator will
help to find the healthy seeds. In order to improve the seeds germination rate, seeds coating machine is essential. Seed Treater will coat the chemical,
fertilizer film on seeds' surface. The chemical will protect the seeds underground
from worm's eaten and prevent diseases. The fertilizer will offer rich
nutrition during seeds budding stage. Finally the cleaned grain/ seeds are
being weighted and packed into bags.
Above is typical grain seed cleaning, processing procedure
introduction. For different customers' demands, raw material requirements, we
will customize the specific suitable plant design. For example, if clients clean
beans, we will recommend extra Bean Polishing Machine to remove soil/dust on
bean surface. If client require a high cleaning rate, the color sorter, hands
picking belt will be added. We provide customized plant solutions basing on
different cleaning situation.
Up to now, we have clients over 100 countries, and we built plants
over 20 countries. We have engineer oversea on -site installation and training
service. Our goal is to make sure the Grain Seed Cleaning Plant run well and client
master the operation tips. It is our aim to help clients get satisfied grain
seed cleaning effect.
Seed & Grain Cleaning / Processing Plant Seed Cleaning Plant,Grain Seed Cleaning Plant,Grain Procesing Plant,Grain Cleaning Plant SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , http://www.seedgraincleaner.com
What should be done for the new pigs?
First clean the empty pig house or fence completely. Then use 2% to 3% of fire alkali water to spray, rinse, brush walls, feed trough, floor, doors and windows. Disinfect 1 to 2 hours, then rinse with clean water. After drying, spray disinfection with 100 toxin and Other poisons. It is best to use a flame sterilizer to bake. (If the flame sterilizer can not be purchased, please consult our company). Before the new pig enters the pen, the insect repellent is used to repel the insects inside and outside the pig once. The levamisole tablets can be used as instructions. It is also possible to use insect repellent (pharmaceutical) evenly coated on the ear of the pig, and it can also drive off both the external and internal parasites at one time.