G-Spot Dildos,G Spot Dildo Rabbit Vibrator,Dildo Vibrator Clit Stimulator,Dildo Rabbit Vibrator For Women Shenzhen Dongchen Hey E-commerce Co.,Ltd. , https://www.xxsexytoy.com
Parts that are not in contact with the material: It is required to be made of 304 stainless steel and proof of material.
All parts in contact with the drug should be mirror polished, Ra<0.4μm, the outer surface of the device is matt treated, Ra<0.8μm, all the solder joints are polished, Ra<1.6μm.
All cast and machined parts have no machining defects.
All the concave and convex parts on the inner and outer surfaces of the equipment adopt circular arc transition (R≥10mm). The inside of the cavity where the equipment is in contact with the material is strictly in accordance with GMP requirements, and must be made into a circular arc transition not less than R10. The internal welding marks must be fully welded, the stencil The upper and lower connection with the cavity must also be made into a circular arc transition to prevent aggregates and ensure that there is no dead angle and easy to clean.
The control cabinet, control box and control buttons have a good seal.
Electrical control: easy to operate and meet the national industry standard circuit design specifications in the electric control cabinet, the installation of electrical components should be standardized, beautiful, concise, convenient component replacement and maintenance;
The electric control cabinet has corresponding protection capability, and the dust cannot enter the cabinet;
The installation position of the electrical control cabinet should be easy to repair and maintain, and the connection cable with the host should be sealed, dustproof, easy to clean and beautifully placed;
GFG-200 high efficiency boiling dryer technical requirements
GFG-200 high efficiency boiling dryer performance and technical requirements Any part of the work contact with the material must be 304 stainless steel, and indicate the stainless steel manufacturer and provide relevant material certification.