I. Overview of the tank The storage tank is used to store chemical substances extracted from alcohol, acid, gas, and the like. There are many types, including steel storage tanks, stainless steel storage tanks, rotomolding storage tanks, FRP storage tanks, ceramic tanks, rubber storage tanks, and welded plastic storage tanks. As far as the cost performance of the storage tank is concerned, the rotomolding storage tank is now the most advantageous. The rotomolding storage tank can be divided into steel-lined plastic storage tanks and two plastic storage tanks, including vertical, horizontal, transportation, stirring, etc. Multiple varieties. Second, the working principle of the tank The steel plate, the steel mesh and the polyethylene are organically integrated into one by a rotomolding process. The polyethylene is firmly adhered to the surface of the steel body. The product has the advantages of no weld seam, no leakage, no toxicity, anti-aging, impact resistance, corrosion resistance, long life and compliance with sanitary standards. It makes up for the shortcomings of the rigid strength of the plastic rotomolding tank, the pressure resistance and the temperature difference. The inner lining of the product is smooth, sturdy and sturdy. Compared with the traditional steel-lined plastic plate storage tank, steel-lined rubber storage tank and steel-lined glass reinforced plastic storage tank, it has better corrosion resistance, no leakage, no peeling and wear resistance. It has the advantages of damage, resistance to certain pressure, high temperature resistance and long life. Its price is lower than the traditional storage tank of the same specification. It is an ideal container for storing corrosive liquid. It is therefore an extremely excellent corrosion-resistant storage tank. Third, the application of storage tanks Made of cylindrical stainless steel 1Cr18Ni9Ti. a closed container welded up and down by a conical head. The upper cone is provided with a safety valve on the outside of the ф40 path washer, the pressure gauge is connected to the steam inlet, and the inlet port is filled with liquid on the outside of the cylinder. The position meter has a high level and a temperature gauge; the bottom of the tank is equipped with a discharge port, and the entire exterior can also be provided with an escalator for operation up and down. It is suitable for the liquid material to be stored in a sterile container. Therefore, before the production and use, the detergent is used for cleaning. The cleaning should be selected by various factors, the pressure is washed by the water washer, and the water is also used. The dishwasher is re-washed, and the cleaning fluid is placed at the bottom discharge port to close the valves. Open the steam valve for sterilization and sterilization. Fourth, the characteristics of the tank Easy to disinfect, easy to operate, safe, reasonable structure, and made of all stainless steel materials, beautiful and hygienic, it is an ideal sterile storage tank. The tank body adopts vertical or horizontal single-layer or double-layer structure, and is filled with insulation materials according to user requirements. The inner liner is polished to Ra 0.45 μm, and the exterior is insulated by a mirror panel or a sanding board. The top is provided with a water inlet, a return port, a disinfection port, a manhole and a 0.45 μm air respirator. The stirring slurry is driven, and can be assembled and disassembled and cleaned. It is an openable lid for cleaning. Two feeding ports can be connected to the pipe for easy connection to various ingredients. After the mouth is filled and the ball valve is evenly stirred, the handle of the ball valve can be rotated by 90°, and the material can be discharged after the discharging is completed, so as to achieve the purpose of uniform mixing.