The exposure method spreads moldy pellets or lumpy feeds thinly on a clean concrete floor. Flip frequently, even in the sun for 2 to 3 days. The roasting method puts moldy granular and powdery feed into an iron pot and roasts it with a slight fire, and mold can be removed in about 30 minutes. The peeling method removes the skin from the moldy feed material by a peeling machine to remove most of the mold. Lime-water soaking method The moldy feed is soaked in 10% pure lime water for 3 to 4 days. Rinse with water again and dry it. The vinegar solution soaking method will be moldy bean cake, peanut cake, rape cake and other cake feed broken into pieces, into 1% vinegar solution soak for about 12 hours, then rinse with water after drying twice. Fermentation neutralizing method mixes moldy feed with water and mixes it evenly to make its moisture content about 50%. Then it is piled together for natural fermentation for 24 hours. Then add 2% of ash to mix well and neutralize for 2 hours. Put it in a bag and use clean water. Rinse, filter out the ash, and finally pour it out. Add 1x bran and ferment in the greenhouse for 7 hours. Industry Application Recovery Machine Industry Application Recovery Machine,high-end special equipment made for organic solvent recovery, automatic cycle operation, built in pneumatic Automatic Feeding Device and vaccum pressure device, air-cooled condensing system, stationary and safe structure, is manufactured according to Chinese explosion-proof standards (CNEX) and European standards (ATEX). By distillation and cooling, clean organic solvents are recycled for use. Industry Application Recovery Machine,Recovery Machine,Industry Recovery Machine,Ipa Recovery SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com