Before we buy some kind of mechanical equipment, the homepage should understand the working principle and components of this kind of mechanical equipment and other details. Below we explain in detail how to buy poultry slaughter equipment. A set of poultry slaughtering machinery, which mainly consists of a scalding pool, a hair removal machine (with vertical hair removal machine and horizontal hair removal machine, which can be selected according to the layout of the factory), and the spiral is composed of a cold machine.
The immersion pool passes through the air blower to make the water outside the scalding pool form a gushing current, and heats the poultry. After the motor drives the propeller to pump the water outside the scalding pool, it is washed away. Therefore, the local curvature of the hot pool is not too small, too small. The temperature affecting the heating of poultry is not too large, and should be between 140 and 150 degrees. Some manufacturers in the lower part of the propeller are welded into a cone type, and some manufacturers are welded to form a body. Regardless of the shape, the spacing should not be greater than 4 cm.
From the immersion pool, the next step is to enter the hair removal machine. Whether it is a vertical hair removal machine or a horizontal hair removal machine, the motor is used to drive the glue stick to perform a continuous alternating blow to the birds, and the hair is knocked off. , go out from the discharge port, so you must pay attention to the quality of the glue stick when purchasing the hair removal machine. The soft and hard must be moderate. If you look at the appearance for the first time, see if the glue stick can be the same, can you have the glue? The spacing between the rod and the glue stick is too small. It should also be noted that waterproofing equipment must be added to the outside of the hair removal machine to prevent the water from spilling out and affect the life of the rolling shaft bearing.