The surface of the roll of the new pasta machine is refined by grinding machine, smooth and beautiful, and the rolled surface is even and smooth, which ensures good quality of the noodle. The design of the machine is reasonable. It adopts arrangement, reducer and sprocket drive, with low noise and compact structure. User-friendly design, effort and effort. It is easy to operate, safe and hygienic, and should be eye-catching. The transmission is stable, the transmission power is accurate and efficient, and it has the characteristics of small noise, no vibration, superior performance, etc. It can be equipped with small drying equipment and is an ideal product for large and medium-sized noodle production enterprises. New pasta machine Performance characteristics of the new pasta machine 1. The noodle machine adopts gear transmission, which is stable, safe and reliable. 2. The noodle machine adopts automatic picking system, which has high efficiency and good quality. 3, automatic conveying of noodle machine, automatic section, automatic upper rod, one molding, saving labor 4, the noodle machine is rolled in multiple sets, the brush is drawn, the feeding is uniform, and the panels are neat 5, noodle machine reducer, sprocket chain drive, low noise, long service life. 6, the pasta machine is safe to operate, clean and hygienic. New pasta machine Precautions and maintenance of the pasta machine: 1. Dry operation should be carried out before use to confirm that there is no abnormality before normal operation. 2. Check the roll and the noodle knife for any debris before starting the machine. The power must be turned off when wiping the machine. The surface should be cleaned up in time after each use. It is not possible to scrape two rolls and noodle knives with sharp air. 3. It is very easy to bring the hand into the roll when entering the surface. The hand and the roll should be kept at an appropriate distance during operation. It is not possible to use tools such as wooden sticks to assist in the operation, otherwise it is easy to cause personal injury and machine damage. 4. Fill the lubricating oil once per shift point and select gear oil or No. 20 mechanical oil. The grease in the bearing is replaced once a year, and the grease of the machine is selected. 5. Always check the tightness and wear of the ordinary V belt, and adjust and replace it in time. 6. When the machine is deactivated for a long time, apply appropriate amount of edible oil to the surface of the two rolls and the noodle knife to prevent rust.