The temperature is controlled by the connection of the digital display meter and the temperature sensor, and the hot air circulation mode is adopted, and the hot air circulation system is divided into a horizontal type and a vertical type. Accurately calculated, the wind source is driven by the air supply motor to drive the wind wheel through the electric heater, the hot air is sent to the air duct and then enters the oven working chamber, and the used air is sucked into the air duct to become the wind source and recirculated and heated. Can effectively improve temperature uniformity. If the door is used in the switch, the air circulation system can quickly restore the operating temperature value.
Industrial oven working principle and nature
The industrial oven is made of angle steel and thin steel plate. In addition, the box is reinforced, the outer surface is lacquered, and the industrial oven of the outer casing and the inner tank is filled with aluminum silicate fiber to form a reliable insulation layer. The industrial oven has a wide range of applications. Drying various industrial materials is a general-purpose drying equipment.
The nature of the industrial oven is made of stainless steel plate, cold steel plate, angle steel, surface lacquer, and the studio is made of high-quality structural steel. There is a casing and a working chamber, and the aluminum silicate fiber is filled between the outer casing and the working chamber. The oven is formed and the heater is mounted on the bottom, top or sides depending on the actual situation. The temperature control instrument uses a digital display smart meter, PT100 to control the temperature! The temperature is controlled by the connection of the digital display meter and the temperature sensor, and the hot air circulation mode is adopted, and the hot air circulation system is divided into a horizontal type and a vertical type. Accurately calculated, the wind source is driven by the air supply motor to drive the wind wheel through the electric heater, the hot air is sent to the air duct and then enters the oven working chamber, and the used air is sucked into the air duct to become the wind source and recirculated and heated. Can effectively improve temperature uniformity. If the door is used in the switch, the air circulation system can quickly restore the operating temperature value.