We offer full set Seed Processing Line solution. Whole seed processing line is from pre-cleaning, fine cleaning, destining, gravity
separating, bean polishing, to seed coating, until seed weighing and packing.
The grain seed processing line is composed of several single machines. Base on different grain type and
processing aim, we will suggest appropriate grain cleaning machines. These grain cleaning machines are
collocated freely. Between each machines, there are Bucket Elevator , slope
elevator or other conveying equipment to link up.
Seed processing line has following
advantages:
Easy to setup, machines easy
to move and can be placed freely.
Save labor, there are middle
conveyors to transfer grain from one machine to another.
Effective and low cost, single
machines compose a seed processing line improve the working performance. Low
production cost makes it hot sale.
Above flexibility and
convenience makes seed processing line makes it becoming hot sales item.
Seed processing line installation
effect and introduction.
This seed processing line is
composed of 5XZC-5DH seed cleaner & grader, 5XZ-5B Gravity Separator , DTY
bucket elevator, 5BY-5B Seed Coating Machine, and DCS-50B Bagging Scale System.
Working flow: The seeds are
fed into 5XZC-5DH seed cleaner &
grader first. Seed cleaner & grader will remove the dust, light
impurity, oversize and undersize impurity before seed flow into 5XZ-5B gravity separator. During seeds cleaned
in gravity separator, the seeds are separated by density difference. The
partially eaten seeds, immature seeds, insect damaged seed, sick seeds, moldy
seeds are separated from good healthy seeds. Then seeds go on being lifted by Dty Bucket Elevator, falling into the 5BY-5B seed
coating machine. During the seed coating procedure, the chemical,
fertilizer or other protective liquidity will be coated to seeds' surface and
improve seeds' germination rate. Finally seeds being transferred to Weighing Scale . Seeds will be weighted
and packed to bags ready for sell.
One seed
processing line includes several seed processing machines. It can be composed
of different single machines freely. Base on client's particular cleaning aim,
we will offer customized seed processing line. It is featured of simple
operation, flexible and cost effectively.
Following is one simple seed processing
line case show
This Seed Cleaning Line is 5 ton per hour
capacity. And it consists of 5XZC-5DH seed cleaner & grader, Slope Elevator ,
5XZ-5 gravity separator, and 5XQS-5 destoner.
Working flow:
Raw material is fed from seed cleaner & grader bucket
elevator hopper. Then bucket elevator transfer raw material to air screen
cleaner to remove the light impurity. The dust, straw, husk are removed
here by air suction and collected by cyclone. Then raw material fall into sieve
trunk. The sieve trunk has several layers. Each layer installed different hole
size sieves. These sieves will grade raw material by size. So the oversize
impurity, undersize impurity are removed. Seeds from seed cleaner outlet box
are received by first slope elevator.
This slope elevator transfer seeds to gravity separator. On the gravity table,
the immature, eaten, sicken, moldy, shrink seeds are separated from good seeds.
As the gravity separator will separated seeds to 3 parts: impurity, mixing
seeds, good seeds. The mixing seeds are received by this first slope elevator too. It will take the mixing grain for reflow. The good seeds are being
transferred by second slope elevator to the destoner. The destoner will separate the stones, heavy impurity out.
Finally you get clean grain from the destoner good grain outlet box.
Seed Processing Line Seed Processing Line,Seed Cleaning Line,Grain Cleaning Line,Sprout Processing Line SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , http://www.seedgraincleaner.com
Processing of flavored potato cake
The flavored potato cake is prepared by steaming potatoes or sweet potatoes into mashed potatoes, mixing them with Other fruits and vegetables (chopped into mud), adding seasonings, and processing them into a variety of shapes and shapes. And by paste powder, quick-frozen products. First, the processing process The potato cake is in the matured potato puree, adding other nutrient-enhancing ingredients and different accessories and seasonings, being extruded by a molding machine, and evenly coated with a layer of flour on the outer surface with a paste-dusting machine. Containing crumbs to make nutritious, delicious, well-shaped, well-shaped products, potato-based convenience foods made by frying or microwave heating. Second, the process 1, cleaning and selection of non-perishable, pest-free potato raw materials into the pool or drum washing machine for cleaning. 2, peeled with a mechanical peel or peeled by hand, peeled potatoes washed with water spray. 3. Slice the peeled potatoes on the artificial inspection line, manually select unqualified products, and then cut the potatoes into thin slices or pieces of 1.5 mm thick so that the cooking can be heated evenly and the cooking time can be shortened. 4, cooking the potato chips washed with water and drain water into the vertical cooking pot, cooking at atmospheric pressure for 20 to 25 minutes, with two fingers squeezed to slice no hard block and completely crushed when appropriate. 5. Pre-dehydrated mature potatoes have a high moisture content and are dewatered by a centrifugal decentralization machine. The centrifuge speed is 3000 rpm and the dehydration time is 3 to 5 minutes. Through pre-dehydration, the solid content in the potato is increased from 15 to 20% to 30 to 40%, which has good moldability and is convenient for post-forming. 6. Crushing The pre-dehydrated potato is further pulverized into a mud using a screw mill. 7. Mixing The pre-dehydrated mashed potatoes are mixed with different auxiliary materials or additives according to the product variety and mixed thoroughly in the mixer. 8. Molding The mold of the appropriate shape is selected, and the mixed mixture is fed into a TSM150 molding machine to be processed. 9. Paste the powdered potato cake and transfer it to the TEM/TPM250 Pasting Machine. Apply a layer of paste to the outer surface of the product. Spread a layer of breadcrumbs to obtain a different appearance. effect. 10. After quick-frozen paste and dusting, the potato product is pre-cooled and then frozen into a quick-freezing room. After being frozen at a low temperature, the packaged product is packaged and frozen. It can also be fried by a continuous fryer before freezing to cure the surface coating and enhance the appearance of color. The frying oil temperature is controlled between 170 and 180°C, and the frying time is about 1 to 2 minutes.