Laying hens keeping is one of the leading areas of the poultry. To maxi- mize the productivity comfortable living conditions shall be ensured to the poultry. Such conditions include not only high-quality food, and an optimum microclimate, but also hitech cage equipment.
Shandong Tmax Intelligent Equipment Co,.Ltd. is the pioneer and specialist in China Poultry Equipment Manufacture.we are the best manufacturer for the Poultry Cages and coupled Automatic Equipment including the Automatic Feeding & Drinking System,Egg-Collection System,Chicken Manure Removal System,Chicken House Environmental Control System. Hen Cage Chicken Breeding Cages,Chicken Battery Cages,Broiler Cages,Broiler Chicken Cages Shandong Shine Machinery Co.,Ltd , http://www.tmaxpoultry.com
1. Most of the pilots do not know that the universal joint of the rotary cultivator has been subjected to balancing experiments and corrections before leaving the factory. Therefore, when installing, it must be noted that the fork joints at both ends of the intermediate shaft must be on the same plane. Some types of universal joints have lock blocks inside the square sleeve, and there is a groove on the square shaft. Be sure to install them in the direction when installing.
2, the universal joint model is different, the size of the structure slightly different, to choose the right model. For example, the same genus of Lianyungang are all rotary cultivators with cultivating width of 1.8 meters. The appearance of the universal joints is basically the same, but the Shanghai-50 matching rotary cultivators and the Jiangsu-504 supporting rotary cultivators have slightly longer shafts and shaft lengths. Differently, the former sleeve and shaft are slightly shorter than the latter. It can be mounted on each other during installation and use, but it is easily overlooked by the operator. The square shaft and the square sleeve are sliding joints. When the rotary cultivator lifts or swings left and right, it can freely expand and contract. It can neither fall off nor fall into the top of the dead shaft sleeve. If the Shanghai 50 tractor is equipped with a rotary cultivator, wrong installation A slightly longer square shaft or bushing will cause the axle shaft of the tractor's power output shaft to break or support the top of the bearing. In severe cases, the top of the rear axle housing can be scrapped. So be sure to find out if the model is installed before you can work.
3. When the cultivator is working down to the ploughing depth, it is necessary to check if the first axis of the universal joint and the rotary cultivator is close to the horizontal, otherwise, adjust the center pull rod on the suspension to ensure that the rotary cultivator is in the best technical condition. If you want to work, if the head of the locomotive operation needs to be lifted, turn it up as low as possible to prevent the gimbal angle from being too large, and spoil the gimbal assembly. According to the practice and access to relevant information, when the universal joint angle exceeds 35 degrees, the noise will gradually increase, and when it exceeds 45 degrees, it will be credited to death.
Our R&D Team can supply the Scientific Integration Scheme by computers for all kinds of Chicken Farms according to Clients` special requests.we have different types of Cages For Layers,pullets,broilers and breeding chickens,and all OEM cages from clients are available,because we have the complete advanced Production line including Wire Drawing,Automatic Cage Meshes Welding,Cold&Hot Galvanization and Automatic System in Mechanical Working for Feeding,Egg Collection machines,so the QC Team can control all product quality we produce for clients in our factory.
Rotary cultivator universal joint vulnerability
In the extermination operation, a large number of rotary cultivators or rake machines are required. Rotary tiller gimbal damage often occurs during operations. Analysis of failure phenomena is nothing more than the following reasons.