Cultivation of astragalus in a plastic greenhouse can be continuously produced throughout the year. Soilless aquaculture can effectively control diseases and increase the benefits exponentially. Second, put into the species: After the pool is built, drain the total drain, fill it with water and soak it for 5-7 days, then drain the water, then plug the bottom drain hole. Keep the water in each pool with microfluidic water, and the water depth is 5cm. Restocking. The oyster species need to be soaked in a 1010-6 malachite green solution for 20-30 minutes prior to stocking to disinfect, prevent saprophytic diseases and eliminate parasites on the surface of the salmon. The length of bathing time is flexibly controlled by the ability of Astragalus. After the worms have been sterilized, they will be stocked in time. Each metre will be 4-5kg of 35-50 pounds per kilogram. The same species as the pool must be the same size to avoid small food. Pharmaceutical Prefilled Syringes, we are the specialist of prefilled Syringes, prefilled Syringes With Needle, wholesale high-quality products of Glass Prefilled Syringe R & D from China.Finished prefilled syringes can meet the FDA`s authorised 14-day sterility test and bagging with ETO Sterilization.We have the perfect after-sales service and technical support. Prefilled Syringes Prefillable Syringes,Preloaded Syringes,Prefilled Syringes China Lemon Trading Co.,Ltd , https://www.lemonvial.com
The optimum growth temperature for Astragalus is 27-30°C. The use of plastic greenhouses does not require special heating equipment. This temperature is easily maintained in spring, summer and autumn sheds. Even in the cold winter, the temperature in the shed can reach an average of 20°C. Micro-flowing water is maintained in the rearing pond and water quality will not deteriorate.
First, build a breeding pond:
1. Open feeding pond. It is suitable for building pools where there is warm water for many years. The advantage is that the flow rate is stable and suitable for larger-scale operations. The disadvantage is that there are regional limitations. The rearing pond is made of bricks and cement. The area of ​​each pool is 10-20 square meters, the depth of the pool is 40cm, the width is 1-2m, and the width of the pool is 20-40cm. In the relative position of the pool, two inlet pipes and two drain pipes with a diameter of 3-4 cm are provided. The height of the water inlet pipe and the bottom of the pool are the same. The height of the drain pipe is equal to the height of the bottom of the pool. One is 5 cm higher than the bottom of the bottom, and metal meshes are installed to prevent the escape. A number of rearing tanks are arranged side by side into one unit, preferably no more than 500 square meters per unit area.
2. Closed loop filter ponds. Suitable for use in big cities or where water is scarce. The advantage is that the rearing water can be reused, the water consumption is less, and the temperature is easy to control, but the investment is slightly larger. The construction method of the rearing pond is the same as that of the open type. In addition, aeration tanks and sedimentation must be built to increase some clean water, pumping and heating equipment.
Third, feeding feed:
Astragalus is a carnivorous fish and prefers fresh feed. After stocking for 2-3 days, chop, snail, frog meat, etc. were chopped and put on the bait station for feeding, and the water flow was appropriately increased. The first feeding amount can be 1%-2% of the total weight of Astragalus. Checking the next morning, if all can be eaten, it can increase to 2%-3% of the total weight of Astragalus after refeeding, and can gradually increase to 5% later. With an increase in food intake, cocoons, fly maggots, cooked animal viscera and blood meal, fish meal, bean cake, rapeseed cake, bran, rice bran, melon hull, etc. can be incorporated into the feed until they are fully fed. Feed to reduce costs. However, the protein content of feed should be 35%-40%. When the Astragalus eats normally, it will be fed once a day at 8-9 in the morning and 2-3 in the afternoon.
Fourth, daily management:
The use of plastic greenhouses to cultivate astragalus, because the water quality is clear, as long as the feed is sufficient, jaundice generally do not escape, but we must pay attention to prevent rats, snakes and other natural enemies harm. After rearing for a period of time, the size and size of the jaundice in the same pool appear to be uneven and must be reared separately in time. After being raised for 5-6 months, it can be listed. The specifications are 6-10 pieces per kilogram, and the survival rate can reach more than 90%.
Fifth, disease prevention and control:
The method of breeding Astragalus with this method is rare, but care should be taken to prevent and treat the following diseases.
1. Cold disease. When the new water is injected, the temperature difference between the original water and the original water is too large. As long as the water temperature is adjusted and stabilized, the disease can be prevented and treated.
2. Capillary nematode disease. Capillary nematodes parasitize the body of salmon, causing the fish to lose weight and death, accompanied by edema, anal swelling. Each kilogram of Astragalus uses 0.1% of 90% crystal trichlorfon and is fed into the feed for 6 consecutive days.
3. Plum spot. Carcasses have bean-sized spots of sore spots at the size of soybeans. Each cubic meter of water can be often disinfected with 10 grams of bleach, and lime or malachite green can also be used for disinfection.