Gosling Plague Viral Yolk Antibody Plague Antibody,Viral Yolk Antibody,Duck And Goose Antibody,Gosling Plague Viral Yolk Antibody Shangqiu Meilan Biological Engineering Co.,Ltd , https://www.melanvaccine.com
â—†Direct diameter : 300mm/400mm
How to operate a small sugar machine
Introduction:
The small sugar-coated machine has two types of stepless speed and fixed speed. It is widely used in the trial production of new products and small batch production in the pharmaceutical, chemical, food and other industries.
Small sugar machine technical parameters:
â—†Speed: 46r/min
â—†Production: 1.5-2kg/time
â—†Wind machine: 40w
â—†Electric machine: 220v 0.55kw
◆Dimensions: 550×400×850mm
560×400×930mm
â—† Weight : 30kg/50kg
Small sugar-coated machine instructions:
First, working principle and structural characteristics
1, working principle
In order to make the chip evenly coated on the surface layer as soon as possible, and to achieve the purpose of polishing, it is necessary to manually spray the chip in the pot with the sugar paddle + mixed slurry, and rotate the pan body clockwise to make the sugar coated piece The inside of the pot is tumbled, slip-friction and ground, so that it is evenly distributed on all the core sheets, and hot air is blown into the pot to remove the surface water of the tablet, and a qualified sugar-coated tablet is obtained after the Zui.
This machine is to provide the Zuijia pot body for this sugar coating process, and to ensure the tablet to form the Zuijia logistics curve in the pot at a stable line speed, in order to meet the process requirements of the uniform thickness, bright color and no pitting of the sugar coating layer.
2, structural characteristics
1 machine movement
The machine is a one-way low-speed continuous rotating coating equipment, and the main motor drives the pot body to rotate through the belt drive-worm worm gear drive.
2 structural features
A. The adjustment mechanism is installed in the machine, and the available unit can adjust the inclination angle of the sugar coating pan according to the tablet loading and material exchange performance. (The amount of charge in the pot is based on the value of the pot angle of 30?)
B. The worm and worm gear are used as the terminal output of the transmission, which has the characteristics of stable operation and the fact that the pot body cannot rotate.
C. The hot air drying device is heated by a hair dryer.
Â
Second, the lubrication of the machine
Serial number
Lubricant grade
Lubricating part
1
HJ-10
Gearbox oil pool
2
ZG-2
Rolling bearing
3
ZG-2
Rolling bearing
Â
Third, maintenance and maintenance of safety technology
1. The lubricating oil in the gearbox and the grease in the inner cavity of the rolling bearing should be replaced regularly.
2. If the sugar-coated pan is not cleaned for a long time, it should be oiled on the surface to prevent the copper of the pot from oxidizing or dampening to produce toxic copper compounds.
3. In order to ensure the lubrication condition of the worm gear in the gearbox, the temperature rise of the box during operation shall not exceed 50 °C.
4. The oil-proof sealing ring at the shaft end of the worm should be checked and replaced regularly (generally no more than six months).
5, the machine must be reliably grounded, its grounding resistance should be ≤ 4Ω
6. Do not dismantle the electrical appliances and belt guards at will.
Fourth, the use of the machine
This machine is a machine for uniformly coating and polishing the formed chips in the pharmaceutical industry. Can also be used in the food industry for candy mechanism pills or coatings.
The coated sugar-coated tablet has a bright and shiny surface, and the surface of the sugar powder is crystallized to produce a complete consolidated coating, which can also prevent the oxidative deterioration of the chip, moisture or volatilization, and cover the chip to take the unpleasant taste. The tablet is easy to recognize and alleviate the dissolution in the human stomach.
Â