Rapidly improve the performance of the tiller

The tiller is favored by greenhouse vegetable growers because of its lightness, flexibility, versatility and low price, but the growers generally reflect that the micro tillage machine has a high failure rate. The reason is mostly caused by the operator's running-in, use and maintenance. Experts remind the operator that the micro-cultivator should be "three in place" in use.

First, the new machine will be in place

Many people think that running-in is not only costly and wastes oil. It is really "uneconomical"; some people do not use the high-speed high-speed use directly, and some do not understand the concept of running-in, thinking that it can be idling for 2~3 hours. . According to experts, running-in is a gradual process. It must start from low throttle, low gear, low load, and gradually increase to high speed, high gear and heavy load. The purpose is to gradually remove the uneven parts of the mating surface of the parts under the conditions of good technical conditions and lubrication, and to lay the foundation for the normal use and extended life of the machine. Therefore, the farmer must use the necessary running-in in strict accordance with the requirements of the manual.

Second, the operation method should be in place

When the tiller is in use, the operation method is not in place, and it is easy to cause some malfunctions. In operation, first avoid overloading for a long time. When working in paddy fields and harder fields, the machine was found to be black smoke and should be downshifted in time. Do not work long hours, otherwise it will easily make the engine poorly lubricated.

Secondly, it is found that the abnormal sound should be shut down for maintenance, and the fault can be restarted; the various gaps should be adjusted frequently; the handrail should be lifted when turning, and the power cutter can not be used to turn, so that it is easy to break the power cutter.

Third, maintenance should be in place

Maintenance is particularly important due to the harsh environment in which the tiller works. In the work, due to the vibration of parts and components, the invasion of oil, mud and water will inevitably lead to wear and tear of parts, loose connection and corrosion aging, which will make the technical state of the tiller deteriorate, power drop and fuel consumption. Increase, wear and tear, and faults continue to appear. The machine is weak, the starting is difficult, the heat dissipation effect is poor, the power is insufficient, etc., which is a typical failure caused by insufficient maintenance.

In order to prevent the above-mentioned situation from happening, it is necessary to strictly implement the maintenance system of “anti-heavy treatment and heavy maintenance”. Maintenance must be carried out in strict accordance with the cycle and content. During maintenance, it is necessary to avoid the use of cold water to cool the air cooler, use fuel and lubricant with poor quality, and screw up the screws on the body. (green spin)