Accompany Chair,Recliner Chair Price,Accompany Recliner Chair,Medical Accompany Chair Jiangyin Kaili Health-Care Equipment CO., LTD. , https://www.kailimed.com
1. Because the cooling and lubrication of the magnetic pump bearing is based on the medium to be transported, it is absolutely forbidden to run dry. At the same time, avoid the time and space planting operation caused by the power failure after the start of the work.
2. The medium to be transported and its temperature should be within the range of the pump material. The pump temperature is <280°C, the Zui working pressure is 1.6MPa, the density is not more than 1840kg/m3, and the viscosity is not more than 30cm2/S. Granules and bismuth-based liquids. Special working conditions should be strictly in accordance with the contractual agreement.
3. If the solid medium is contained in the medium to be transported, the filter inlet should be added with a filter: if it contains ferromagnetic particles, a magnetic filter is required.
4. For the medium whose transport liquid is easy to precipitate, it should be cleaned in time and drained from the pump.
5. After 1000 hours of normal operation of the magnetic pump, the damage of the bearing and the end moving ring should be dismantled and replaced with the damaged parts.
Introduction to the matters needing attention during the use of high temperature magnetic pump
High temperature magnetic pump should pay attention to the following during use: